Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Atascocita?
Spring replacement in Atascocita typically costs $180 – $340 for a single spring, and most doors use a matched pair that gets replaced together, so a full pair usually runs about twice that. That’s a typical estimated range for the Atascocita market. The written estimate you get after we look at the door sets the final price, so nothing about your quote is guesswork.
Springs don’t fail on a schedule, and they don’t fail politely. A torsion spring that snaps at 6 a.m. leaves you with a door that won’t open and a car stuck in the garage. We handle that as an emergency call, and we handle it as scheduled maintenance too. Either way, one call covers it: Atascocita Garage Door Repair Pros works on torsion and extension springs across every major door brand, and our technicians have up to 9 years of experience with exactly this kind of failure.
Key takeaways:
- One spring: typically $180 – $340. A matched pair: roughly double that, because both springs usually age out together.
- Most spring jobs in Atascocita are finished the same day, including emergency calls.
- Brand matters less than spring type, door weight and how the door is balanced – all of that shows up in the estimate.
- Springs hold enormous tension. This is not a DIY repair, and we say that as a safety point, not a sales pitch.
Spring Replacement Cost Breakdown (2026)
Here’s how spring work breaks down against the rest of what we do, so you can see where a spring job sits next to related repairs. All figures are typical estimated ranges for Atascocita.
| Service | Typical Estimated Range |
|---|---|
| Spring replacement, one spring | $180 – $340 |
| Spring replacement, matched pair | About twice the single-spring range |
| Full garage door repair (mixed jobs) | $150 – $600 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2200 |
What pushes a spring job toward the top of its range? A snapped spring often takes a cable with it, so a $180 spring swap can turn into a spring-plus-cable job. Heavier insulated doors, two-car doors with a pair of torsion springs, and doors that have been running on one tired spring for a while all add labor. On the other end, a single extension spring on a lighter one-car door sits near the bottom of the range. If the spring is the only thing that failed, the price stays simple. If the door has been dragging for months and wore out rollers and a track along the way, that’s when the number climbs. We tell you which one you’re looking at before we touch anything.
It helps to know where Atascocita homes tend to land in this. Many neighborhoods here – Eagle Springs, Summerwood, Walden on Lake Houston, Kings River, Atascocita Shores – were built out over a stretch of years, and the doors that came with those houses are a mix of builder-grade and upgraded insulated units. Two-car garages dominate, which means most spring calls we get are matched-pair jobs rather than single-spring jobs. If you’re in a townhome or a smaller lot with a single-car door, the math is usually lighter. That’s the kind of detail that goes into an estimate before we quote a number.
What Affects Spring Replacement Pricing in Atascocita
Two doors of the same width can carry very different price tags. Here’s what moves the number:
- Torsion vs. extension springs. Torsion springs mount above the door on a shaft and extension springs run along the tracks. Torsion setups take more careful winding and calibration, and they’re the norm on most two-car doors in this area, so they tend to sit in the middle-to-upper part of the range. Extension springs are simpler and usually land lower.
- One spring or a pair. When one spring of a matched pair breaks, the other has been under the same load for the same years. Replacing only one leaves you back on the phone within months, so we usually recommend the pair. That’s the single biggest swing in the final number.
- Door weight and insulation. Insulated doors, glass-panel doors and oversized doors need heavier springs. Heavier springs cost more and take more time to set correctly.
- What the failure took with it. A broken spring often means a kinked cable, a bent track or a door left hanging crooked. Each of those has its own line item – cable repair, track realignment – and bundling them into one visit saves you a second call-out fee.
- The Houston-area humidity and heat. Our long, hot, humid summers work on steel springs year after year. Doors here cycle in a climate that’s hard on metal, which is why springs fail on a fairly predictable arc and why we check the whole assembly, not just the broken part.
- How accessible the door is. A standard two-car garage with clear space overhead is quick work. A door boxed in by shelving, a low ceiling or a tight single-car bay takes longer and can nudge labor up.
Brand plays a role too, mostly in how fast the diagnosis goes. We work on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor systems specifically, so we know how each one is built and how its springs and hardware are set up. That’s not a sales line – it’s time saved on the job. A technician who’s seen a hundred Wayne Dalton doors doesn’t need to figure out the door before fixing it.
Can You Fix a Broken Spring the Same Day?
Yes. Most spring calls in Atascocita are handled the same day, and emergency service is a core part of what we do, not an add-on. If a door won’t open because a spring let go, you shouldn’t be stuck waiting until the middle of next week for someone to show up.
When you call, we ask a few quick questions: what the door is doing, whether you heard a loud bang from the garage, and whether the door is sitting crooked or hanging open. That lets us send the right parts and the right technician. Back up and running the same day is the goal on almost every spring job, and a snapped spring is one of the most common calls we get. If something else turns up once we’re there – a cable, a roller, a track – we tell you before we do the work and quote it up front. No surprises on the invoice.
One thing worth saying plainly: if your spring has snapped, leave the door alone and keep it closed if you can. Don’t try to force it, don’t try to lift it by hand, and don’t try to unwind or replace the spring yourself. Springs store enormous tension, and a mistake with one can cause serious injury. That’s true of torsion springs above the door and extension springs along the track. This is a job for a trained technician with the right tools, and that’s what you get when you call.
How to Save on Spring Replacement
Spring replacement isn’t a place to chase the lowest number, because a cheap spring that fails early costs more than a good one. But there are real ways to keep the bill down:
- Get one written estimate that covers the whole job. A quote that lists spring, labor and any related parts up front beats a low headline price with add-ons later. Our estimates are free, and the written estimate is the price.
- Replace the pair at once. Paying for one spring call, then a second call months later, usually costs more than doing both springs in one visit.
- Bundle related fixes. If a cable or track is shot, rolling it into the same appointment saves a separate call-out fee.
- Have the door serviced before the spring goes. A balanced door with clean, oiled rollers and a properly lubed spring puts less strain on the springs. Catching a worn spring before it snaps can keep a small tune-up from becoming a full replacement.
- Ask about spring quality. A better-grade spring with a longer cycle life costs a bit more up front and usually lasts longer between replacements. Worth asking about when you get the estimate.
- Don’t put off a door that’s acting up. A door that slams shut, opens crooked or feels unusually heavy is telling you a spring is on its way out. Fixing it early is cheaper than fixing it after it snaps and takes the cables with it.
Call (844) 493-5692 for a free estimate. Tell us what the door is doing and we’ll give you a typical range for your situation before anyone comes out.
Repair or Replace the Spring: What’s the Right Call?
For a door that’s otherwise in good shape, spring replacement is almost always the answer – it’s the cheapest way back to a working door. A new door installation range of $700 – $2200 makes sense when the door itself is failing: cracked panels, a bent track beyond straightening, or a door so old that replacing the springs every year stops penciling out. If you’re near that decision, spring replacement is the first thing to price, because a lot of doors people assume are finished just need new springs and a tune-up. If your door also needs opener work, panel replacement or a full install, we handle all of it in one place, so you aren’t coordinating three different companies.
FAQs – Spring Replacement Cost
How much does it cost to replace one garage door spring in Atascocita?
One spring typically runs $180 – $340 in Atascocita. Most two-car doors here use a matched pair, so plan on about twice that if both springs are being replaced. Call (844) 493-5692 for an exact quote – estimates are free.
Is it cheaper to replace one spring or both?
One spring is cheaper today, but two springs replaced together is usually cheaper over time. When one spring of a pair breaks, the other has taken the same wear, so replacing just one often means a second service call within months. Doing both in one visit saves the extra call. Call (844) 493-5692 and we’ll price the pair against the single for your door.
Does spring replacement cost more for a two-car garage door?
Yes, usually. Two-car doors are heavier and often run a pair of torsion springs, which puts the job higher in the range than a single-car door with one extension spring. The door’s weight and insulation matter as much as its width. Call (844) 493-5692 for a range on your specific door.
Can you fix a broken spring today?
In most cases, yes. Spring calls are one of the most common emergency jobs we handle, and same-day service is available. When you call, tell us what the door is doing so we can bring the right parts. Call (844) 493-5692 for a free estimate.
Will my homeowner’s insurance cover a broken spring?
Sometimes, but it depends on the policy – a sudden spring failure that damages the door or a vehicle may be covered, while normal wear usually isn’t. We can work with your insurer if you’re filing a claim. Call (844) 493-5692 and we’ll get the repair moving while you sort out the paperwork.
Can I replace a garage door spring myself?
We don’t recommend it, and it’s not a job we’ll talk anyone through. A garage door spring stores enough tension to cause serious injury if it releases the wrong way, and the tools and technique required aren’t typical homeowner gear. That’s true of torsion springs above the door and extension springs along the track. Call (844) 493-5692 and a trained technician will handle it safely.
How long do garage door springs last in Atascocita?
It depends on how often the door cycles and the grade of the spring – a busy two-car door wears out faster than a one-car door used twice a day. In our heat and humidity, springs are working hard, and a door that opens crooked or feels heavy is telling you the spring is worn. Call (844) 493-5692 if your door is acting up and we’ll take a look.
What else should I have checked when the spring is replaced?
Cables, rollers, tracks and the opener should all get a look while we’re there. A snapped spring often takes a cable with it, and a bent track or worn rollers will wear out the new spring faster. Bundling those fixes into one visit saves you a second call-out. Call (844) 493-5692 for a free estimate on the whole job.
Ready to Get Your Door Working Again?
A broken spring doesn’t get better with time, and a door that’s been running on a failing spring can do more damage than the spring itself. Whether it snapped this morning or it’s been groaning for a month, call Atascocita Garage Door Repair Pros at (844) 493-5692 for a free estimate. We work on every major brand, handle emergencies the same day, and one call covers the spring, the cables, the opener and anything else the door needs. The written estimate sets the final price, so you know exactly what you’re paying before the work starts.
Pricing reflects the Atascocita market as of 2026. Atascocita Garage Door Repair Pros offers free estimates – call (844) 493-5692.
What Our Customers Say
"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
- Aisha Bryant"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Carmen Hernandez"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
- Greg Walsh